66-pin DDR chip
tester available for RAMCHECK DDR Pro.
This low-cost converter tests 66-pin DDR chips used in
today's memory modules, including 1Gb (128Mx8,
256Mx4), 512Mb (32Mx16, 64Mx8) and smaller (4Mx16,
32Mx8, 8Mx8, 64Mx4, 16Mx4 and 32Mx4) DDR chips.
(11/16/05)
Electronics Express
Europe publishes their review of the RAMCHECK DDR Pro memory tester.
(6/1/05)
Test & Measurement World details what you
should look for in a PC memory tester.
RAMCHECK Firmware Ver.
2.21e is now available. This latest
version adds "Bank Bits Detection" data to the Test
Log when testing DDR or SDRAM modules. This data is of
particular benefit to technicians using RAMCHECK to
repair modules. For more details please review the application
note on RAMCHECK Device Structure Analysis.
In 2.21e we have also added some functionality to the
new RAMCHECK 200pin DIMM adapter for the x144 EDO/FPM
Sun memory modules. Please keep your RAMCHECK tester
up-to-date by downloading the firmware.
Two new RAMCHECK adapters
are available. With these adapters, RAMCHECK now
supports 200-pin
Sun DIMMs and legacy 72-pin SODIMMs.
An article
about the SIMCHECK II PLUS has been published at LittleWhiteDog.com on
July 1st, 2000. LittleWhiteDog.com is a valuable
independent information source for computers and
related software products.
INNOVENTIONS announces Calibration and Upgrade
process to enable existing SIMCHECK II/II SE PLUS
units to test today's PC-133 SDRAM devices. (5/10/00)
We have released the new
SIMCHECK 200-pin DIMM
Adapter that supports the 200-pin, 144-bit
FPM/EDO DIMM modules for the Sun Station and other Sun
Microsystem Computers.(4/20/2000)
RAMCHECK News Releases
DDR3 240-pin DIMM testing
now available (read
more)