info
Thank you for visiting the RAMCHECK web site, the original portable memory tester.

DDR2 Adapter Specifications


RAMCHECK
                        DDR2 test adapter


DDR2 Adapter Key Features


DDR2 Adapter Specifications



Basic Test
  • Identifies module type, size, configuration, voltage and frequency
  • Checks open/short, addressing and identifies defective bits

Extensive Test
  • Voltage Cycling
  • Voltage Bounce
  • March Up/Down
  • Special DDR2 Tests
  • Temperature Stress Test

Auto-Loop Test
  • Module is endlessly tested with different pattern bits
  • Detects pattern sensitivity problems
  • Excellent for burn-in procedure

Test Frequencies
  • Test DDR2 modules at 866MHz, 800MHz, 667MHz, 600MHz, 533MHz, 466MHz, 400MHz and 366MHz.
  • Test frequencies automatically selected by the current test flow. Selected frequency can be optionally changed interactively by the user.
  • Maximum test frequency of 866MHz.

DDR2 Test Parameters
  • Trcd setup of 2, 3, 4, or 5.
  • CAS Latency (CL) setup of 2, 3, 4, 5, 6. (Note: Not all modules support CL=2 and 6.)
  • Additive Latency (AL) setup of 0, 1, 2, 3, 4.
  • Write Recovery (WR) of 2, 4, 5, 6.
  • OCD control of None, 50ohm, 75ohm, and optional 150ohm.
  • Burst Length of 4 or 8.
Addressing Capability
  • 16 Rows and 12 Columns addressing. Up to 8GB modules can be tested. Test support is added as larger modules are introduced to the market.

VDD Setup
  • Uses digitally controlled state-of-the-art switching power supply for Vdd range of 1.5V to 2.2V.
  • Voltage automatically defaults based on frequency to 1.8V-1.9V.
  • User has interactive control of the wider range.
Data Bus Width
  • x64 to x72 bits (Parity/ECC).

SPD Programming
  • Edit/program/save SPD data, unlimited SPD files
  • Production Mode for automated SPD programming
  • Convenient SPD Wizard

Upgrades
  • Free firmware and PC software upgrades via the Internet
  • Optional DDR2 converter/adapters are under development for a wide range of DDR2 memory formats
Test Socket
  • Yamaichi 240-pin test socket, with rugged latches for easy insertion and removal of the modules.
Operating Temp/Humidity
  • 3C to 32C (40 F to 90 degrees F), 20% - 80% non-condensing

Dimension/Weight
  • 7" x 2.6" x 2.1" (W x L x H)/1 lb (3 lbs shipping weight)
  • 17.8cm x 6.6cm x 5.4cm (W x L x H)/.45kg (1.4 kg shipping weight)
  • NOTE: These dimensions do not include the RAMCHECK base tester on which this adapter must be mounted.
Warranty
  • 1-year limited warranty

Please specify part number INN-8668-15 when ordering this adapter.

Product operation and specifications are subject to change without prior notice.

Some customers may want to build their own adapters for unique memory formats not supported by RAMCHECK. This may require special firmware customization, provided at additional cost. Please review this application note for more information.


Please send me more info
Our team will contact you as soon as possible.

Message has been sent! x



USA Flag Made in USA of U.S. and imported parts

Tech Support
Introduction
Manuals
Software Downloads
FAQ
Calibration & Upgrades
Application Notes
Service & RMA Policy